The pack is supplied pre-adjusted to level-2 on the harness straps. This harness position will fit the majority of riders. Adjust to level 1 for XS and level 3 for XL fit.
Step 1: Firstly push the harness strap back into the pack to release the harness-web tension.
Step 2: Shorten or lengthen harness by moving slider on web – equal both sides.
Step 3: Pull harness strap back out of pack to tension harness-web.
Put on pack and fasten front 2 x harness buckles. Adjust alloy buckles on hip wings by lifting and pulling the nylon cord. Tighten alloy buckles so the wings grip the sides of your torso. The top harness straps should not be a close fit, but not too tight.
Increase capacity by 5 litres by adding a US-5 drypack (See US-5 link below).
Fitting instructions: thread US-5 fitting straps through the square rings on the front of the R30. Reversible: zip pocket or mesh pocket on the front.