Kriega R35 Back Pack
|Size: 570(H) x 300(W) x 200(D) mm35-litre capcityUnique QUADLOC harnessCNC 6061-T6 alloy buckles (patent protected)2 x outer zip-pocketsFront mesh pocket with shock-cordTop zip-mesh pocket
inner A4 sleeve pocket
Optional add-on 5 or 10 litre drypacks
|SUPERSPACE: 5mm airspace back.YKK water-resistant zips.HYPALON: Abrasion resistent re-enforcement.Scholler Dynatech With integrated 3M scotchlite.420 D nylon Ripstop Lightweight yet extremely strong.3M Scothlite: reflective logo.10 year guarantee.|
The pack is supplied pre-set to level 2. For XL fit move to level 3 and level 1 for XS fit.
Step 1: push the harness strap back into the pack to release the harness-web tension
Step 2: Shorten or lengthen harness by moving slider on web – equal both sides
Step 3:Pull harness strap back out of pack to re-tension harness web
Step 4: Put on pack and adjust fit as on a conventional harness. Do not over tighten. Tidy loose web-ends under elastic loops. Once set, the harness straps do not need to be readjusted each time, as the pack ergonomics allow the harness to open for wide access.
Increase capacity by 5 litres by adding a US-5 drypack (see US-5 link below)
Fitting instructions: Thread 2 x US-5 fitting straps through the web-loops on the front of the R15.
Increase your carrying capacity by 10-litres by adding a US-10 dry pack (100% waterproof main body). Water-resistant zip pocket and mesh pocket on underside. 10-year guarantee.
(see US-10 link below)
Optional 0.5 litre harness pocket. YKK water-resistant zip and 3M Scotchlite reflective print (see Kube pocket link below).
Optional 3-litre Hydrapak reservoir. The R15 has an internal compression pocket and quick-release buckle to locate the reservoir. Velcro tube-management component included (see 3L reservoir link below)